There can be your advertisement
300x150
Parquet Toning
When choosing flooring for their home, people look for materials that retain heat, are highly wear-resistant, visually appealing, and low-maintenance. That's why wooden floors are often preferred — due to their durability, eco-friendliness, and safety.
However, after finishing renovation and arranging furniture, you might notice a visual mismatch between the parquet and your interior design. Replacing parquet is impractical and expensive, so toning is the best solution.
Parquet Toning with Stains
Stains are commonly used for parquet toning — liquid solutions that penetrate wood. This process requires prior sanding and dust removal. After application, the stain changes the wood's color while preserving its natural texture. A few layers of varnish are then applied over the stain.
One drawback is uneven absorption due to wood’s natural structure, which may cause visible light and dark patches — especially noticeable in large rooms.
Modern stains now have shorter curing times and improved formulations, ensuring a more even coating. They are applied using a planer sander to distribute the solution uniformly. After curing, excess is removed, and the floor is ready for use within 24 hours.
Parquet Toning with Oil
Oil-based toning provides an elegant, natural look and is eco-friendly. It doesn’t require a separate varnish layer, as the oil contains protective components. Application tools include brushes, scrapers, and rollers.
After application, oil is worked into the wood using a planer sander. Excess oil is wiped off, and the surface is left to dry.
Multiple coats may be needed to achieve the desired result. The exact number depends on wood type and absorption rate. Oil is excellent for lightening wood or enhancing its appearance to resemble premium grades.
To extend durability in high-traffic areas, apply several layers of clear oil over the colored one, creating a protective barrier against wear.
Parquet Toning with Lacquer
Another method uses specialized lacquers, offering a wider color palette than stain or oil. Unlike stain, lacquer does not penetrate wood, so color can be easily changed after a few years.
However, lacquer wears down in high-traffic areas and cannot be partially repaired. Once worn, the entire floor must be re-lacquered.
Always complete all construction work before toning, to avoid damaging the newly treated surface. Test the result on a scrap piece of the same wood to preview final appearance — influenced by both stain color and original parquet tone.
