DIY Idea: Bed Headboard in Scandinavian Style Made by Yourself

The dimensions of the headboard given in the instructions may not match the size of your bed. You need to make your own calculations, using ours as an example. The sizes on the drawings are given in inches. For your convenience, we have replaced them with centimeters in the description.

Before starting, clear the working surface and cover it with protective material. Read the safety rules provided by the manufacturers of the saw and nail gun.

You will need:

Materials:

✓ finishing nails
✓ wood glue
✓ 120 grit sandpaper.

Tools:

✓ tape measure
✓ pencil
✓ circular saw
✓ eye and ear protection
✓ nail gun (or hammer).

What will we do?Step 1. Cutting the Legs

Cut blocks measuring 2.5x5 cm and 2.5x7.5 cm and attach them to each other as shown in the picture. To make the nail heads invisible, drive them from the back side of the middle block: it will be covered by another part.

Step 2. Main Part

Starting from the top, secure the panels on the headboard as shown in the picture. Boards marked in red color are 2.5x10 cm, and those in blue – 2.5x15 cm. Attach the boards together with nails and glue. As in the previous step, drive the nails from the back side of the headboard.

Step 3. Attaching the Panels

Attach the panels to the front side of the legs as shown in the picture. Keep the outer edges even.

Step 4. Reinforcing the Structure

Attach blocks measuring 2.5x10 cm to the front side of the headboard as shown in the picture. Drive the nails from the back side so that their heads are not visible from the front. Then attach similar panels to the back side of the headboard using 5 cm nails and glue.

Step 5. Side PanelsStep 6. Top Panel

Measure and cut the top panel for the headboard according to required dimensions. At this stage, the length of the panel should match the total length of the headboard (including the legs). Use 5 cm nails and glue to secure it.

Step 7. Decorative Top Panel

Cut another top panel. It should be slightly larger in size than the previous one: longer by 4–5 cm and wider by 3–4 cm. Place the panel in the center of the headboard (make sure that the overhangs on both sides are symmetrical) and secure it using 5 cm nails and glue.

Step 8. Finishing Touches

Fill all visible nail holes with wood filler and sand them smooth. Attach the headboard to the bed frame.

Pinterest