DIY Idea: Bed Headboard in Scandinavian Style Made by Yourself

The dimensions of the headboard provided in the instructions may not match the size of your bed. You need to make your own calculations, using ours as an example. The sizes shown on the diagrams are in inches. For your convenience, we have replaced them with centimeters in the description.

Before you start, clear the working surface and cover it with protective material. Read the safety rules provided by the manufacturers of the saw and nail gun.

You will need:

Materials:

✓ finishing nails
✓ wood glue
✓ 120 grit sandpaper.

Tools:

✓ tape measure
✓ pencil
✓ circular saw
✓ eye and ear protection
✓ nail gun (or hammer).

What will we do?Step 1. Cutting the Legs

Cut blocks measuring 2.5x5 cm and 2.5x7.5 cm and attach them to each other as shown in the picture. To make the nail heads invisible, drive them from the back side of the middle block: it will be covered by another part.

Step 2. Main Part

Starting from the top, secure the panels to the headboard as shown in the picture. Boards marked in red are 2.5x10 cm, and those in blue – 2.5x15 cm. Attach the boards to each other with nails and glue. As in the previous step, drive the nails from the back side of the headboard.

Step 3. Attaching the Panels

Attach the panels to the front side of the legs as shown in the picture. Keep the outer edges even.

Step 4. Reinforcing the Structure

Attach blocks measuring 2.5x10 cm to the front side of the headboard as shown in the picture. Drive the nails from the back side – so that the heads are not visible from the front. Then attach similar panels to the back side of the headboard using 5 cm nails and glue.

Step 5. Side PanelsStep 6. Top Panel

Measure and cut the top panel for the headboard according to required dimensions. At this stage, the length of the panel will match the total length of the headboard (including the legs). Use 5 cm nails and glue to secure it.

Step 7. Decorative Top Panel

Cut another top panel. It should be slightly larger than the previous one: longer by 4–5 cm and wider by 3–4 cm. Place the panel in the center of the headboard (make sure the protrusions are symmetrical on both sides) and secure it with 5 cm nails and glue.

Step 8. Finishing Touches

Fill all visible nail holes with wood filler and sand them smooth. Attach the headboard to the bed frame.

Pinterest